4x4 Short Course racing pushes the limits of your equipment. To combat the high temps and demands of the modern 4x4 Short Course race day, Novak is introducing the Vented Ballistic 550 Brushless Motor- 4.5T (#3504V). This is the same motor that has been powering drivers to the top of short course podiums across the racing world, but with the added value and performance of Novak’s vented end bells. The vents allow the motor to release the hot air which reduces the motor’s operating temperature and increases the motor’s overall performance.
Double the Size, Nearly Double the Power and Torque!
Novak uses the same proven stator design and shape from the standard 540 motors, but has double the length of the stator and rotor to provide racers with the largest race-legal motor for 4x4 Short Course Trucks. This massive motor means simply that your truck will have NO power problems. Clearing triples, quads, and even the entire five-pack will become a traction issue, not a power problem! The vented end bells and proven Novak quality of motor design means high performance and extreme reliability.
Novak Built and Supported
Novak takes pride in its manufacturing facility in Irvine, California and also with its use of high-quality components and assembly and testing processes. Each Novak brushless motor is built and tested in the Novak factory to Novak’s exacting standards. All Novak products are supported by Novak’s knowledgeable customer support staff and race team.
Vented end bells for cooler operating motor temperatures resulting in faster speeds and longer run-times
Sensor-based system for excellent torque and low-speed driveability
Oversized 5mm front bearing for increased load handling and bearing life
Rebuildable design with replaceable sensor harness, rotor, sensor board, hand-wound stator, sleeve, both end bells, ball bearings, and hardware
Adjustable motor timing to allow fine tuning of motor feel and power band
Motor Turn: 4.5
Input Voltage: 2S LiPo
Kv (unloaded): 5,000 RPM/Volt
Motor Size (540): 2.84” x 1.41” (72.1 x 35.8mm)
Motor Weight: 9.8 oz (277.8g)
Shaft Diameter: 5mm
Rotor: Sintered Neodymium